Products
- Product Overview
- VN-100
- VN-110
- VN-200
- VN-210
- VN-300
- VN-310
- Product Overview
VN-100

VN-110

VN-200

VN-210

VN-300

VN-310
Gyro In-Run Bias : 5°/hr

Pitch/Roll : 0.5°

Accel In-Run Bias : < 0.04 mg

Static Pitch/Roll : < 0.05˚

Gyro In-Run Bias : 0.6°/hr

Accel In-Run Bias : < 10 µg

Dynamic Heading : 0.2°

Dynamic Pitch/Roll : 0.03°

Gyro In-Run Bias : 5°/hr

Accel In-Run Bias : < 0.04 mg

Dynamic Heading : 0.05˚- 0.1˚

Dynamic Pitch/Roll : 0.015˚

Gyro In-Run Bias : 0.6°/hr

Accel In-Run Bias : < 10 µg

GNSS-Compass Heading (1m) : 0.15° - 0.3°

Dynamic Heading : 0.2°

Dynamic Pitch/Roll : 0.03°

Gyro In-Run Bias : 5°/hr

GNSS-Compass Heading (1m) : 0.15° - 0.3°

Dynamic Heading : 0.05°- 0.1°

Dynamic Pitch/Roll : 0.015°

Gyro In-Run Bias : 0.6°/hr
External IMU and M-Code Support
Applications
Resources
About
Login

Technical Notes

Hard and Soft Iron Calibration

The Hard and Soft Iron Calibration technical note provides information necessary to perform a hard and soft iron calibration on VectorNav products.

Requested Information

Fill in the form below to gain access to the resource

First Name

Last Name

Company

Telephone

Job Title

Describe your Application

Additional Comments or Requests

Register for an Account

Register for an account and you can access all of VectorNav technical content without having to fill out a form each time. You can also make online purchases.

Back to Technical Notes